Sign In | Join Free | My benadorassociates.com
China BEST PIPELINE EQUIPMENT CO.,LTD logo
BEST PIPELINE EQUIPMENT CO.,LTD
Your one stop shop for all your piping needs such as Seamless & Welded Carbon / Stainless & Alloy Steel Pipes, Mainly alloy Steel Pipes , Forged Flanges, Butt Weld Fittings, Forged Fittings,
Verified Supplier

6 Years
Home > Blind Pipe Flanges >

X2CrNi19-11 Steel Forged Blind Pipe Flanges EN 10028-7 1.4306 Blind Flanges

Product Categories
BEST PIPELINE EQUIPMENT CO.,LTD
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now

X2CrNi19-11 Steel Forged Blind Pipe Flanges EN 10028-7 1.4306 Blind Flanges

Material : X2CrNi19-11

Steel number : 1.4306

Type : steel forged blind flanges

Standard : EN1092-1 Type 01

Contact Now

Grade :X2CrNi19-11
Number:1.4306
Classification:Austenitic stainless steel
Density:7.9 g/cm ³
Standard:
EN 10088-2: 2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10088-3: 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10028-7: 2007 Flat products made of steels for pressure purposes. Stainless steels
EN 10216-5: 2014 Seamless steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes
EN 10217-7: 2005 Welded steel tubes for pressure purposes. Stainless steel tubes
EN 10296-2: 2005 Welded circular steel tubes for mechanical and general engineering purposes. Stainless steel. Technical delivery conditions
EN 10253-4: 2008 Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
EN 10272: 2007 Stainless steel bars for pressure purposes
EN 10263-5: 2001 Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for stainless steels
EN 10250-4: 2000 Open steel die forgings for general engineering purposes. Stainless steels
EN 10297-2: 2005 Seamless circular steel tubes for mechanical and general engineering purposes. Stainless steel. Technical delivery conditions
EN 10253-3: 2008 Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
EN 10088-1: 2005 Stainless steels. List of stainless steels
EN 10088-5: 2009 Stainless steels. Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
EN 10088-4: 2009 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes

Chemical composition % of steel X2CrNi19-11 (1.4306): EN 10088-2-2005
Particular ranges of sulphur content may provide improvement of particular properties. For machinability a controlled sulphur content of 0.015 % to 0.030% is recommended and permitted. For weldability, a controlled sulphur content of 0.008 % to 0.030 % is recommended and permitted. For polishability, a controlled sulphur content of 0.015 % max is recommended.
Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast.
CSiMnNiPSCrN
max 0.03max 1max 210 - 12max 0.045max 0.01518 - 20max 0.11


Mechanical properties of steel X2CrNi19-11 (1.4306)
Rm - Tensile strength (MPa) (+A)460-700
Rm - Tensile strength (MPa) (+AT)460-680
Rm - Tensile strength (MPa) (+AT+C)740-780
Rp0.2 0.2% proof strength (MPa) (+AT)180
Rp0.2 0.2% proof strength (MPa) (+A)180-220
KV - Impact energy (J) transverse, (+A)+20°
60		-196°
60
KV - Impact energy (J) longitud., (+A)+20°
100
A - Min. elongation at fracture (%) (+A)35-45
A - Min. elongation at fracture (%) longitud., (+AT)40
Nominal diameter (mm):2 - 50
Z - Reduction in cross section on fracture (%)63-68
Brinell hardness (HB): (+A)215
Brinell hardness (HB): (+AT)200


Properties of steel X2CrNi19-11 (1.4306)
Resistance to intergranular corrosion: in the delivery condition - yes; in the sensitized condition - yes
Steel shal not be applied at a metal temperature lower than -270 ° C


Equivalent grades of steel X2CrNi19-11 (1.4306)
Warning! Only for reference
EU
EN		USA
-		Japan
JIS		France
AFNOR		England
BS		Italy
UNI		Sweden
SS		Poland
PN		Finland
SFS		Russia
GOST
X2CrNi19-11
304L
SUS304L
Z2CN18-10
Z3CN18-10
304S11
X2CrNi18-11
2352
00H18N10
720
03KH18N11

Product Tags:

Steel Forged Blind Pipe Flanges

      

X2CrNi19-11 Blind Pipe Flanges

      

1.4306 Blind Flanges

      
Quality X2CrNi19-11 Steel Forged Blind Pipe Flanges EN 10028-7 1.4306 Blind Flanges for sale

X2CrNi19-11 Steel Forged Blind Pipe Flanges EN 10028-7 1.4306 Blind Flanges Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: BEST PIPELINE EQUIPMENT CO.,LTD
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You May Like